Back

Other Ritter Materials

Main Menu

 

CLOSE THIS WINDOW 

CLOSE THIS WINDOW 


Sysdrain

One system, many possible applications
One system, many advantages

 
One system, many possible applications

The ideal percolation system for houses, garages, areas in use, agricultural buildings, sports facilities, carports, summer-houses, conservatories and many other applications.

The demand for on-site percolation of rainwater and thus for relieving the burden on the public drainage system is arising ever more frequently. Sysdrain, the plastic percolation shaft, represents the ideal solution. Given its low own weight and its modular construction, it is extremely easy to transport. Standard connections facilitate simple and economical installation.

Drainage/percolation
Drainage of areas in use
Inspection shaft
Cellar drain
Planting trough
Cisterns
Stackability
 
Drainage/percolation
           
    Up 


Roof drainage on new buildings and as replacement drains. For example: residential housing, weekend residences, log cabins, garages, carports, conservatories, agricultural buildings.



 
Drainage of areas in use         Up 


E.g. parking areas, entrances to courtyards, childrenís play areas, sports facilities
 
Inspection shaft                     
  Up 


To house the installation or as a pump well for a garden pond or on a building site.
 
Cellar drain
                                  Up 


Used in conjunction with the inlet module, Sysdrainis a cost-favourable and convenient solution. Comprehensive installations for draining these surfaces can be dispensed with. Simply install Sysdrainpre-assembled in the ditch, fill in, concrete in - job done!
 
Planting trough                            
  Up 


To protect the trunk e.g. during building work, as a plant container or to restrict root growth.
 
Cisterns                                            
  Up

 

Using a hosepipe, Sysdraintransforms into a small cistern (3 sizes for approx. 170, 340 and 510 litre capacity are available).
Extraction using an electrical or hand-driven pump.

Note: cisterns (concrete or plastic) require an overflow - Sysdrainis especially suitable for this!
 
Sysdraincan be stacked             
  Up 



As a rule, up to three elements can be stacked. In individual instances, 4 or 5 elements have already been successfully installed on top of one another.
 
One system, many advantages    
 
  Up 
  • Modular construction
  • Extremely simple assembly using a tongue and groove locking system
  • Lightweight (approx. 11 kg), making for ease of transport
  • No need for heavy machinery when installing
  • Manufactured from pure-grade HD-PE recycled material, which can be recycled again.
  • For the professional and the private home-owner
  • Also suitable for large facilities
  • Standard connections (Ø approx. 100 mm), thus can easily be integrated with existing peripherals.
  • Relieves the burden on the public drains system
  • Percolation over the entire upper surface of the shaft
  • Can be customised to suit particular requirements (stackable or arranged as a battery)
  • Greatly reduced time required for installation
  • Protective of the environment, because it facilitates local water percolation.
  • Can be combined with all standard trade inlet and drainage pipes.
Inlet module
Shaft element
Cover
Base
Filter fleece
Hosepipe
Adapter
 
Inlet module                          
  Up 

For direct water feed from above (e.g. for drainage of areas in use) or to connect a inlet pipe, Ø 150 mm.
Larger items trapped in the water are filtered out in the integrated coarse sieve. The cover of the inlet module and the coarse filter are removable.
 
Shaft element                         
Up 

The pre-manufactured holes on the side walls can easily be broken through using a hammer.
Sysdrainis rapidly ready for use, due to the tongue-and-groove construction system.
The small-diameter holes (18 per side element) assist with large-area percolation.
The water exit direction can thus be defined specific to use.
The large holes (3 per side element) form the connection points for standard pipes (Ø 100 mm).
To increase capacity, two or three shaft modules can be installed either as a stack or arranged as a battery.
 
Cover                                         
    Up 

The cover can withstand heavy loads. It is held in position with 3 screws on top of the prepared shaft. If a pond pump is installed (water reservoir), the cover can be cut open at the point marked.
 
Base                                            
  Up

When used as a water reservoir, the base is inserted and serves to protect the hosepipe.
It is pressed in from above into the assembled ring of the shaft and then sealed.
When used as a small composter, the base serves as a lid.
 
Filter fleece                                  
  Up 

The filer fleece prevents ingress of sand and other materials trapped in the water into the percolation shaft.
It is simply laid around the percolation shaft and attached to the outside using the anchorage points provided. The filter fleece is non-perishable and permanently water-permeable.
 
Hosepipe                                      
  Up 

Sysdrain can be converted to a water reservoir using a hosepipe. 3 sizes (approx. 170, 340 and 510 litres) are available for different capacity requirements.
The hosepipe is inserted into the shaft and attached on the upper edge with the cover fitted.
 
Adapter                                          
  Up 

Using the adapter, you can attach a wide variety of standard trade shaft coverings (to be walked upon, internal diameter approx. 600 mm) and their accessories.
As a base ring, the adapter serves to stabilise the shaft on the shaft floor.
 
Back

  Up

CLOSE THIS WINDOW 



Sysdrain

Technical data


Load: Shaft without inlet module with 50 cm overlap in accordance with DIN 1072: 10 kN/Bridge class 3/3
Shaft with inlet module mounted on top in accordance with DIN 19599: 10 kN

Description
Dimensions
Side element, individual
approx. 528 x 620 mm
Side elements, assembled (Storage capacity approx. 170 l)
approx. Ø 612 x 620 mm (external)
approx. Ø 600 mm (internal)
Connection openings
approx. Ø 115 mm
Cover
approx. Ø 627 x 112 mm
Accessoires
 
Reservoir film, 1 module
approx. 170 l
Reservoir film, 2 modules
approx. 340 l
Reservoir film, 3 modules
approx. 510 l
Filter fleece
approx. 2,100 x 650 mm
Inlet module, complete, comprising cover, coarse sieve, inlet support
connection for standard pipe Ø 150 mm
Base
approx. Ø 592 x 39 mm
Adapter for shaft coverings capable of being walked on (600 mm internal diameter)
Ø 545 mm (internal)
Ø 790 mm (external)
Material:
pure-grade recycled HD-PE material, capable of being recycled again
Working:
Sysdraincan be worked without difficulty using traditional tools (hand drill, hand saw, compass saw)
Back

  Up

 CLOSE THIS WINDOW